FLYWHEEL PULLER M27 x 1.00 LH, BUZZETTI 5250 00-101_B

FLYWHEEL PULLER / EXTRACTOR 27mm x 1.00 LEFT HAND.
BUZZETTI 5250

Honda
CRF50F 04-11, XR50R 00-03, CRF70F 04-11, CR80 83-02, CRF80F 04-11, XR80 79-03, CR85 03-08, CRF100F 04-12, XR100/R 81-03, CR250R 1981, CR500 84-01.
Kawasaki
KDX 03-06, KX60 83-03, KX65 00-12, KDX80 80-88, KX80 83-85, KX80/85/100 98-12, KX125 93-05, KDX200 97-06, KDX220 97-05, KDX 91-94, KX250 92-07, KX500 84-85, KX500 92-04.
KTM
65SX 99-12, 85SX 04-10, 85XC 2008, 105SX 06-11, 105XC 08-12, 125EXC 98-02, 125SX 98-11, 144SX 2008, 150SX 09-10, 150XC 10-11, 200EXC 98-05, 200MXC 98-02, 200XC 06-09, 200XCW 06- 12, 250EXC 00-05, 250MXC 00-02, 250SX 00-12, 250XC 06-07, XC250 06-07, 300EXC/MXC 98-05, 300XC/XCW 06-07.
Suzuki
RM60 2003, RM65 03-05, DR100 83-90, RM100 2003, DR125 82-88, DRZ125/L 03-09, RM125 96-08, DR200 86-88, RM250 89-08, RMX250 89-98.
Yamaha
To many to list.

Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-101_B (oro2u.com)

00-101_B