M22 / 22mm x 1.50mm Right Hand fly wheel puller Extractor.

BOSCH, DUCATI, MOTOPLATT,

Beta Rev80 and Evo 80cc trials bikes
PIAGGIO NGR MC2 50 2T LC fino a 1997,
PIAGGIO NRG 50 2T LC,
PIAGGIO NRG EXTREME 50 2T,
PIAGGIO NRG EXTREME 50 2T LC,
PIAGGIO NRG MC2 50 2T LC dal 1998 in poi,

• Used for removal of the flywheel or rotor.
• Premium quality high carbon steel S45C.
• Heat treated for strength and durability.
• Durable hot black oxide finish.
• 22mm x 1.50P RH External Thread.

Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-131.DR (oro2u.com).

Cross Reference Numbers Only:
BUZZETTI 5219, A-2724