FLYWHEEL PULLER M18 x 1.50 RH, YAMAHA

FLYWHEEL PULLER EXTRACTOR 18mm x 1.50mm RH. BUZZETTI 5208

YAMAHA
MX CROSS YZ125/250,

• Used for removal of the flywheel or rotor if applicable.
• Premium quality high carbon steel
• Heat treated for strength and durability
• Durable hot black oxide finish

Part No. 00-096_B (oro2u.com)

Cross reference numbers.
BUZZETTI 5208, UP-12919

Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.