FLYWHEEL PULLER 30mm x 1.5mm, RH External Female MP8

Flywheel Puller 30mm x 1.5-RH-External Female K&L 35-5938

Suzuki
Suzuki DR200SE 2004 – 2009
Suzuki LT-F160 QuadRunner 1989 – 2001
Suzuki LT160E 1991 – 1992
Suzuki LT230E QuadRunner 1987 – 1993
Suzuki LT230GE 1985 – 1986
Suzuki LT230S QuadSport 1985 – 1988
Suzuki LT250EF 1985 – 1987
Suzuki LT250R QuadRacer 1985 – 1992
Suzuki LT250S 1989 – 1990
Suzuki TM125 1970 – 1975
Suzuki TM250 1970 – 1975
Suzuki TM400 1970 – 1975
Suzuki TS250 1970 – 2009
LT160/LT230/LT230G/LT250E/S
TM/MX Series 125/250/400 all years,
TS250 Enduros.
Also know to fit LT-F160N Quadrunner

models. EARLY DR 4 STROKE MODELS.
HARLEY 2-CYCLES
1969 Suzuki TS2501 Savage
1970 Suzuki TS2502 Savage
1971 Suzuki TM400R
1971 Suzuki TS250R Savage
1972 Suzuki TM250J
1972 Suzuki TM400J
1972 Suzuki TS250J Savage

• All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection.
• Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8in. fine thread bolts used in all pullers.

Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-095 (oro2u.com)

Cross Reference Numbers Only:
MP8