FLYWHEEL PULLER 19mm x 1.00, BUZZETTI 5209

FLYWHEEL PULLER M19 BUZZETTI 5209

19mm x 1.00 Right Hand, Flywheel Exractor Magneto puller.

LEM, KTM, Italjet, PW50 and lots of small engines.

Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-099_B (oro2u.com)