PISTON KIT 01-13 KTM125 SX 54, NAMURA NX-70029-C, 2-RING

NAMURA PISTON KIT NX-70029-C SIZE C BORE 54.00mm [53.96mm]

KTM
SX 125 2001 – 2013,
EXC 125 2001 – 2014,
HUSQVARNA
TC/TE125 2014,
HUSABERG
TE125 2012-2014,

• High-performance Namura pistons are engineered in the USA, manufactured in Taiwan.
• High-silicon content Hypereutectic cast aluminum material for less heat expansion, tighter clearances, increased hardness, longer life and reduced scuffing
• Features machined, smooth piston crowns for reduced carbon buildup, increased horsepower and fuel economy
• Hard anodized crowns are 75% stronger than non-anodized, providing minimal expansion and reducing the chance of cold seizures when combined with Teflon/Molybdenum coated skirts
• MOS2 (Teflon/Molybdenum) coated skirts perform at the highest standards, reducing friction and heat for added power and longevity
• Namura rings match the OEM design except as noted
• -B (.0004 in.) and -C (.0008 in.) fractional oversize pistons, available for some applications, extend the life of your expensive cylinder by renewing the original clearance if its slightly worn, avoiding an expensive sleeve installation
• Piston assemblies include ring(s), wrist pin and circlips

Part No. 56-W010.C.NT (oro2u.com)

Cross reference numbers ONLY.
Piston I Cpl. 54Mm 125 2001 50330007500 I 50330207100 I,
Piston Ii Cpl. 54Mm 125 2001 50330007500 II 50330207100 II,

KTM

• 2004 KTM 125 EXC
• 2003 KTM 125 EXC
• 2002 KTM 125 EXC
• 2001 KTM 125 EXC
• 2013 KTM 125 SX
• 2012 KTM 125 SX
• 2010 KTM 125 SX
• 2009 KTM 125 SX
• 2008 KTM 125 SX
• 2007 KTM 125 SX
• 2006 KTM 125 SX
• 2005 KTM 125 SX
• 2004 KTM 125 SX
• 2003 KTM 125 SX
• 2002 KTM 125 SX
• 2001 KTM 125 SX